BESTFLOW MOTOR CO.,LTD

　

AC Axial Fan: K8038A

FAN PHOTO:

GENERAL FEATURES

	Impeller	:	PBT UL94V-O Non-Flammability Reinforced Plastic
	Casing	:	PBT UL94V-O Non-Flammability Reinforced Plastic
	Insulation Resistance	:	10MΩ or over with a DC500V Megger
	Dielectric Withstand Voltage	:	AC1500V 2s
	Bearing System	:	Ball Bearing or Sleeve Bearing
	Lead Wire	:	UL 1007#24AWG, +Red, -Black.300mm Length
	Operating Temperature	:	-10°C~+80°C
	storage Temperature	:	-40°C~+85°C
	Expected Life	:	Ball Bearing System	:	45ºC 50,000 Hours.
	Expected Life	:	Sleeve Bearing System	:	45ºC 35,000 Hours.
	Above measurements apply	:	20°C±5°C
	reiutive humidity	:	65%±15%.
	Motor	:	Shaded Pole Induction Motor.

MODEL:K8038A

Model	Rated Voltage	Frequency	Current	Input Power	Speed	AirFlow	Static Pressure	Noise
Model	(VAC)	(Hz)	(AMP)	(W)	(RPM)	(CFM)	(Pa)	(dBA)
K8038A15B10	115	50	0.06	6.90	1950	26.00	31	21
K8038A15B10	115	60	0.05	5.75	2200	30.00	33	23
K8038A15B20	115	50	0.07	8.05	2300	32.50	35	24
K8038A15B20	115	60	0.065	7.47	2600	37.60	38	27
K8038A15B30	115	50	0.10	11.50	2800	42.00	44	29
K8038A15B30	115	60	0.09	10.35	3200	45.00	50	31
K8038A22B10	220	50	0.05	11.00	1950	26.00	31	21
K8038A22B10	220	60	0.045	9.90	2200	30.00	33	23
K8038A22B20	220	50	0.06	13.20	2300	32.50	35	24
K8038A22B20	220	60	0.055	12.10	2600	37.60	38	27
K8038A22B30	220	50	0.07	15.40	2800	42.00	44	29
K8038A22B30	220	60	0.06	13.20	3200	45.00	50	31
Rotation: Counterclockwise as seen from the label side.
*Special Design is available on request.

　

MECHANICAL DRAWINGS			CHARACTERISTIC CURVES

　

☆☆☆☆☆ COPYRIGHT © 2002-2004 BESTFLOW MOTOR CO.,LTD. ALL RIGHTS RESERVED. ☆☆☆☆☆
January.2002Year

　