BESTFLOW MOTOR CO.,LTD

　

AC Axial Fan: K8025A

FAN PHOTO:

GENERAL FEATURES

	Impeller	:	PBT UL94V-O Non-Flammability Reinforced Plastic
	Casing	:	PBT UL94V-O Non-Flammability Reinforced Plastic
	Insulation Resistance	:	10MΩ or over with a DC500V Megger
	Dielectric Withstand Voltage	:	AC1500V 2s
	Bearing System	:	Ball Bearing or Sleeve Bearing
	Lead Wire	:	UL 1007#24AWG, +Red, -Black.300mm Length
	Operating Temperature	:	-10°C~+80°C
	storage Temperature	:	-40°C~+85°C
	Expected Life	:	Ball Bearing System	:	45ºC 50,000 Hours.
	Expected Life	:	Sleeve Bearing System	:	45ºC 35,000 Hours.
	Above measurements apply	:	20°C±5°C
	reiutive humidity	:	65%±15%.
	Motor	:	Shaded Pole Induction Motor.

MODEL:K8025A

Model	Rated Voltage	Frequency	Current	Input Power	Speed	AirFlow	Static Pressure	Noise
Model	(VAC)	(Hz)	(AMP)	(W)	(RPM)	(CFM)	(Pa)	(dBA)
K8025A15B10	115	50	0.05	5.75	1450	21.50	30	20
K8025A15B10	115	60	0.045	5.17	1800	23.00	35	22
K8025A15B20	115	50	0.08	9.20	2000	25.50	40	24
K8025A15B20	115	60	0.07	8.05	2500	30.60	48	27
K8025A15B30	115	50	0.10	11.50	2600	31.50	52	28
K8025A15B30	115	60	0.09	10.35	3100	36.50	58	33
K8025A22B10	220	50	0.05	11.00	1450	21.50	30	20
K8025A22B10	220	60	0.045	9.90	1800	23.00	35	22
K8025A22B20	220	50	0.07	15.40	2000	25.50	40	24
K8025A22B20	220	60	0.06	13.20	2500	30.60	48	27
K8025A22B30	220	50	0.10	22.00	2600	31.50	52	28
K8025A22B30	220	60	0.09	19.80	3100	36.50	58	33
Rotation: Counterclockwise as seen from the label side.
*Special Design is available on request.

　

MECHANICAL DRAWINGS			CHARACTERISTIC CURVES

　

☆☆☆☆☆ COPYRIGHT © 2002-2004 BESTFLOW MOTOR CO.,LTD. ALL RIGHTS RESERVED. ☆☆☆☆☆
January.2002Year

　